Experienced supplier of lambda,afr,air/fuel ratio

This new Classical gauge is 60mm in diameter.
With a piece smoke lens, this gauge has a very classical design, the dial faces are hidden when the power is off.
By using the new technology, this series gauge can obtain accurate data from the vehicles and display it immediately without any delay.
High brightness backlight allows you can see it clearly even in the sunshine, luminance adjustable function will bring you a suitable brightness at the night. A black Regular position bezel with the black gauge cup will make it up as black samurai style.
At the same time, excellent quality can well meet your requirements, such as an available buzzer, adjustable warning setting, start actions etc..

Features

This gauge uses 8 pieces of high-quality LEDs as the backlight, it brings a high brightness backlit in the daytime, and the brightness will be reduced to suit your eyes when you turn on the headlight in the nighttime. The gauge has the red Warning LED, it will blink and the buzzer will sound in the meantime when the oil pressure is lower than the setting value, and the blue PEAK LED will display the highest value for 3 seconds when you turn off the engine.

9 Color Options

This gauge can display White, Red, Purple, Sky Blue, Yellow, Blue, Gold, Teal, Green and Pink. You can adjust one solid colour or 10 colour cycle display. It's easy to adjust the colour of the gauge to match your factory dash lights or create a custom look inside of your car or truck. With the Color Memory feature, you won’t have to reset the colour of the gauge every time you turn on your vehicle.

Daytime/Nighttime light

There are two modes for the brightness and colour setting: Daytime mode and Nighttime mode. You can set the different colours and brightness in different two modes, then you can turn on/off the headlight to switch between Daytime and Nighttime modes after you connect the Yellow wire( in the power cable) to the headlight fuse.

What Are the Benefits of the Air/Fuel Ratio Gauge?

Analog gauges are exposed directly to the source of their measurements, which in this case is the voltage output of an oxygen sensor. Fluctuations affect the needle proportionately, and these variations translate into accurate readouts. As a result, this mechanical gauge will immediately demonstrate any changes in the air/fuel ratio with pinpoint precision. Given the smooth needle movement, any rate of change can be detected very easily.

Guarantee

One year limited warranty and free lifetime tech support. You will also have access to an unrivalled customer support experience in the event you have any questions about our gauges, pods and accessories.

Gauge Series: Classical Series

Brand: KET GAUGE

Gauge Type: Air/Fuel Ratio Gauge

Range of Reading: 10-20

Face Color: Black

Size: 60mm

Lens: Clear

Backlighting Color: 9 Colors

Sending Unit: Without Sensor

Measurement Unit: Standard

Display: Analog

Included

60mm (2-3/8”) Air/Fuel Ratio Gauge x 1 piece
Power Harness x 1 piece
Connect wire x 1 piece
Gauge cup x 1 piece
double sided tape x 1 piece
Buffer x 1 piece
AFR signal wire x 1 piece
Installation Instructions x 1 piece